Model ES-62T produces excellent intelligibility for speech and full-frequency response for music making it ideal for retail, commercial, industrial, institutional, and residential applications. This self-contained in-ceiling speaker system with 6-1/2 inch coaxial driver has a high-frequency PEI tweeter with acoustic lens to provide the kind of crisp, high-frequency response expected from high quality coaxial speakers. The ported enclosure is tuned for extended low-frequency response, while the speaker’s wide dispersion can actually reduce the number of speakers required to produce even coverage in distributed speaker systems.
ES-6T Features
PERFORMANCE: Suitable for a variety of applications that require clear speech and full frequency music. DRIVER: 6-1/2 inch coaxial – High frequency PEI tweeter with acoustic lens to provide a crisp high-frequency response– Wide dispersion (120 degrees conical) can reduce the number of speakers required for even coverage in distributed speaker systems. TRANSFORMER: 32W – Tap selections for 25V, 70V or 100V speaker systems– 4ohm (UL minimum) transformer bypass position– Selector switch behind grille GRILLE: Fine mesh 20-gauge CRS steel press-fit grille with white finish, scrim and pull tool. ENCLOSURE: Factory-mounted enclosure ships attached to the driver (non-removable). – Durable 20-gauge steel with grey finish.– Ported enclosure tuned for extended bass response– Built-in mounting dogs aid fast installation, while allowing the speaker to mount in drywall, wood, tile or almost any type of ceiling with thickness of 0.1 inches up to 1.4 inches. – Removable (4 pin) Phoenix-style connector with 2 terminals for input to speaker and 2 parallel terminals for output to next speaker in string.– Seismic restraint ring tie-off– Internal volume 379 cu.in.
BAFFLE: Low-profile front baffle formed from UV-rated high impact plastic. C-RING & SUPPORT RAILS: Ring reinforces edge of drywall ceiling cut-outs and works with the two support rails to help distribute weight of speaker assembly to help prevent sagging tiles in lay-in tile ceilings. TEMPLATE: Paper template to properly mark ceiling cutouts for mounting holes. PAINT GUARD: Plastic shield fits over driver to protect it when baffle is painted. COMPLIANCE: – UL1480A General Signaling, USA– UL 2043 Return air plenum space– CSA C22.2 No.205-12 General Signaling, Canada.
PERFORMANCE: Power Handling . . . . . . . . . . . 50W RMS (at 8 ohms) measured per EIA Standard RS-426B Sensitivity . . . . . . . . . . . . . . . 88.6 dB log average SPL (at 8 ohms) @1W/1M over the frequency response range, measured in half-space. Maximum SPL . . . . . . . . . . . . 105.6 dB (calculated based on power rating and measured 8 ohm sensitivity). Impedance . . . . . . . . . . . . . . 8 ohms (nominal), 4.0 ohms @ 12461 Hz (min.) Note: Selector knob shows 4 ohm position as mandated by UL for minimum impedance. Frequency Response . . . . . . . 64Hz – 20kHz (±6dB) Conical Dispersion Angle . . . .120 degrees conical @2kHz octave (-6dB) Crossover Frequency . . . . . . .3kHz Transformer Taps . . . . . . . . . .100V (32, 16, 8, 4.2W); 70V (32, 16, 8, 4, 2W); 25V (4.4, 2.2, 1.1, .55, .28W) PHYSICAL (Full Range Speaker): Woofer Cone . . . . . . . . . . . . .Specially formulated polypropylene Surround . . . . . . . . . . . . . . . .Rubber Woofer Magnet Weight . . . . .15.45 oz. (438.1g) Woofer Voice Coil Dia. . . . . . .1-inch (25.47mm) Tweeter Cone . . . . . . . . . . . .PEI with acoustical lens Tweeter Magnet Weight . . . . .0.64 oz. (18.09g) Tweeter Voice Coil Dia. . . . . .1-inch (25.47mm)
