Introducing the Connect 1504 high-power IoT-enabled smart amp. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms).
With three different methods of network connection, users can connect using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection. Then there’s the Cloud…The Connect Series is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.
Connect 1504 Features
• 100% Designed and Engineered in South Bend, IN U.S.A. • Advanced DSP with 96kHz Linear Phase FIR Filters • IoT-Enabled - Connect with leaprofessional.cloud for Remote Control and Monitoring Over the Internet • Three Ways to Connect: Wired Ethernet, 802.11 b/g/n Wi-Fi, and Built-In Wi-Fi Access Point • Web UI Hosted on Amplifier for Control and Monitoring on Any Device • Low-Z, Hi-Z 70V, or Hi-Z 100V Individually Selectable on Every Channel • 2 Smart Power Bridge Channels! • Industry Leading Power Supply Design o Universal SMPS w/ PFC o 225 Volt Rails o Mid 90’s% Efficiency o Low Standby Power (compared to competitors) o Large Power Storage Bank for Extended Power Delivery • Tuned Output Filter for Very Flat Frequency Response • 32-Bit Floating-Point DSP w/ Built in Sample Rate Converters • Dante and AES67 Support Via Dante Broadway Module • Up to 4 seconds of Delay per channel
|
AUDIO SPECIFICATIONS
|
|
|
INPUTS
|
Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
|
|
THD+N
|
0.1% (20Hz to 20kHz)
|
|
FREQUENCY RESPONSE
|
20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
|
|
SIGNAL TO NOISE LEVEL
|
105dB (20Hz to 20kHz referenced to 8Ω)
|
|
CROSSTALK
|
70dB (20Hz to 20kHz)
|
|
AMPLIFIER OUTPUT CLASSIFICATION
|
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
|
|
DSP
|
|
|
DSP ARCHITECTURE
|
Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
|
|
INPUT MATRIX
|
Routable matrix; any input to any output with primary and secondary input priority
|
|
CROSSOVERS
|
Advanced DSP with Linear Phase Brick wall FIR Crossovers and up to 48dB/Octave IIR Filters (Link witz Riley and Butterworth)
|
|
PARAMETRIC EQ
|
8 Band Parametric EQ per channel
|
|
OUTPUT DELAY
|
4 seconds per channel
|
|
OUTPUT PROTECTION
|
DC, VHF, and AC Mains Protection, Over temp and Current Limiter, fan fault detection
|
|
USER ADJUSTABLE LIMITING
|
Peak Voltage and RMS Voltage
|
|
LOAD MONITORING
|
Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
|
|
CONTROL, MONITORING, NETWORKING
|
|
|
USER INTERFACE
|
Web Browser User Interface, 3rd Party API control, or CLOUD control
|
|
EXTERNAL I/O
|
External I/O In: Toggles Remote On/Off
External I/O Out: Indicates Amplifier Health
|
|
OPERATION
|
|
|
AC MAINS
|
100VAC - 240VAC +/- 15% 50Hz or 60Hz
|
|
POWER SUPPLY
|
Universal Switch Mode Power Supply with Power Factor Correction
|
|
PHYSICAL SPEC
|
|
|
DIMENSIONS (L X W X H)
|
Product: 17.88” x 19” x 2U (362mm x 482mm x 2U) (362mm x 482mm x 2U)
Shipping: TBD
|
|
WEIGHT
|
26lbs / 11.8kg | Shipping: 30 lbs. / 13.6 kg
|
|
COOLING
|
Front to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m
Fan Noise at 50% is 57dB @1m
Fan Noise at full speed is 63dB @ 1m
|
