The M1280B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280B condenser microphone is equipped with a cardioid capsule and is also available with hypercardioid, omnidirectional, or shotgun capsules. The M1280B has a very wide frequency response and may be used in a wide variety of stage, studio, and broadcast applications.
The M1280B miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Audix M1280B Features
Lightweight, small profile · Miniaturized preamp circuitry · No external power adapter needed · 12 mm gold vapor diaphragm · Immune to RF interference · Extremely low noise, high SPL handling · Designed, assembled, manufactured & tested in the USA · 3 year warranty
Audix M1280B Applications
Overhead mic for choir, group vocal · Acoustic instruments · Ambient room miking · Symphonic area miking · Speech, Presentation, Podium · Cymbals, Percussion · Acoustic guitar
Audix M1280B Specifications
| Transducer Type |
Condenser |
| Frequency Response |
40 Hz – 20 kHz |
| Polar Pattern |
Cardioid, Hypercardioid, Omni, Shotgun |
| Output Impedance |
150 ohms |
| Sensitivity |
10 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1k |
| Equivalent Noise Level |
21 dB (A-weighted) |
| Signal to Noise Ratio |
73 dB |
| Maximum SPL |
≥147 dB |
| Power Requirements |
18 – 52 V |
| Dynamic Range |
126 dB |
| Connector |
3-pin XLRm |
| Polarity |
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Materials / Finish |
Machined Brass / Black Finish |
| Weight |
28 g / 1 oz |
| Length |
67 mm / 2.6 in |
