Price: $1,870.14

Crown CDi 2000 2-Channel Commercial Install Amplifier

The Crown CDi 2000 2-Channel Amplifier was designed as a professional solid state power amplifier. It was engineered for installed sound applications. The series is super durable and lightweight. The Crown CDi 2000 2-Channel Amplifier deleivers an amazing value in its class. The Crown CDi series amplifiers were created with a front-panel LCD screen to assist installers through configurations. CDi amplifiers are built with an onboard DSP for loudspeaker signal processing.  The Crown CDi 2000 2-Channel Amplifier also includes a switch-mode universal power supply, highly useful function indicators, proportional-speed fan-assisted cooling, removable Phoenix-style inputs, barrier strip outputs for low-Z or 70V/100V/140V loads, short-circuit protection and more. This power amplifier gives you top of the line protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The Crown CDi 2000 Amplifier also comes stacked with integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD also displays important system status updates and other information.  

Crown CDi 2000 2-Channel Amplifier FEATURES:

  • -Rugged and lightweight steel construction.
  • -Operates in dual or bridge-mono modes.
  • -Rack mountable.
  • -Excellent sound reproduction with low distortion.
  • -Advanced protection circuitry protects against overheating, overloads, and shorts.
  • -Switch-mode universal power supply.
  • -Wide range of speaker impedances and outputs
  • -Backlit LCD.
  • -Integrated DSP.

Crown CDi 2000 2-Channel Amplifier SPECIFICATIONS:

Frequency Response 20Hz - 20kHz (@ 1W into 4 Ohms).
Sensitivity 1.4V @ 8 Ohms.
Signal to Noise Ratio 100dB.
Voltage Gain 30.5dB (@ 1kHz, 8 Ohm Rate Output).
Load Impedance Rated for 2-8 Ohms in Stereo Mode. Rated for 4-16 Ohms in Bridge-Mono Mode.
Input Impedance 20 kOhms (Nominal).
Output Power 1000W @ 2 Ohm Dual (Per Channel). 800W @ 4 Ohm Dual (Per Channel). 475W @ 8 Ohm Dual (Per Channel). 2000W @ 4 Ohm Bridge-Mono. 800W @ 70V Dual (Per Channel). 1600W @ 140V Bridge-Mono.
Damping Factor Better than 500 from 20 to 400Hz.
Crosstalk >70dB Below Rated Power, 20Hz to 1kHz.
Max Input Signal 22dBu Typical.
Inputs 2 x 3-Pin Removable Phoenix-Type.
Outputs 4-Position Barrier Strip with Connectors for Dual Loudspeakers or Bridge-Mono Loudspeaker.
Power 100V, 120V-240V, 50/60 Hz.
Dimensions (WxHxD) 19 x 3.5 x 12.25" (483 x 89 x 311mm).
Weight 19 lb (8.6 kg).